Fatbiker.co.uk » 1125r ulysses footpeg conversion http://www.fatbiker.co.uk Welcome to Fatbiker.co.uk Fri, 20 Jan 2012 20:38:13 +0000 en hourly 1 http://wordpress.org/?v=3.3.1 1125r Ulysses footpeg conversion http://www.fatbiker.co.uk/2009/07/01/1125r-ulysses-footpeg-conversion/ http://www.fatbiker.co.uk/2009/07/01/1125r-ulysses-footpeg-conversion/#comments Wed, 01 Jul 2009 20:15:49 +0000 Fatbiker http://www.fatbiker.co.uk/?p=268 Fitted the Ulysses pegs to my 1125r this evening. They are a good inch or so lower than the standard peg and are double the depth so foot comfort on longer trips should be better. I have adjusted the angles of the gear changer and rear brake to compensate for the lower pegs. I’ll get a few miles done and confirm whether its a must have conversion or not. I’m not totally convinced at this point because I’m concerned that base plate where your foot goes is further away from the frame and therefore makes getting to the foot levers a problem. I did do a quick 5 mile ride after fitting them and it did appear to me ok so time will tell…

Below are a couple of pictures of the pegs before and after…

Standard 1125r foot peg Ulysses foot peg

]]> http://www.fatbiker.co.uk/2009/07/01/1125r-ulysses-footpeg-conversion/feed/ 5